A lawn sprinkler system makes life much easier and saves us time. A sprinkler system cuts back on the use of water by watering more effectively. However, a broken sprinkler system can waste over 4,000 gallons of water a month. Most sprinkler problems go unnoticed because they run at night and go unseen. Common problems with a lawn sprinkler system is that they are not rising above the grass (not popping up all the way) as well as broken tops and broken pipes below the ground. Sprinklers that do not cover correctly wastewater and can causing lasting damage. Call Sprinkler Master at (208) 398-3471
It's easy to run over a sprinkler head with a lawn mower or set sprinkler water pressure too high, which makes broken sprinkler heads a common source of irrigation frustration. If your sprinkler heads have broken casings, won't pop up all the way, and/or have inconsistent or nonexistent spray patterns, you may need to replace them.
When looking for replacement sprinkler heads, it is important to match the brand of the sprinkler system you have installed. For instance, Dr. Sprinkler Repair works exclusively with Rain Bird products for installations, so any replacement parts our expert sprinkler technicians purchase will be Rain Bird products as well. Purchasing the same brand as the original parts allows for a seamless transition to a working lawn irrigation system.
Prior to replacing a sprinkler head, be sure to shut off the water sprinkler system. Next, dig a hole (approximately two feet in diameter) around the broken sprinkler head. Make sure to save the dirt in order to fill in the hole later! Be careful not to damage the irrigation sprinkler pipes, as that will require a much bigger fix. Dig down 8 to 12 inches to the base of the sprinkler's vertical pipe, also known as the "riser," in order to expose all of the pieces that will be replaced.
Carefully twist the old sprinkler head in a counterclockwise fashion to remove it from the vertical pipe, so that you don't get soil in the pipe (this could cause a blockage in the water line and potentially damage the new sprinkler head). If the years of use have caused the sprinkler head to become stuck in place, a wrench may be needed to loosen it. Hold the riser in place while using a wrench to avoid tearing the rest of the irrigation pipes out of place.
Install the new sprinkler head by twisting it into place with a clockwise motion (no need for a wrench - hand-tight will be just fine). Set the spray pattern according to the directions that accompanied the purchase of the new sprinkler head, then replace the sod that you removed from the hole previously.
Here at Dr. Sprinkler Repair (Boise, ID 83701), we know that the customer is the boss.
Our
specialized sprinkler technicians work to make sure that YOU are
satisfied with the work they've completed, rather than leaving before
the job is done. Call (208) 398-3471 now to set up your individualized
Dr. Sprinkler Repair experience.
We're all working for the weekend! Don't let your weekend be ruined by ceaseless yardwork and stress over broken sprinklers. Dr. Sprinkler Repair (Boise, ID) has your back. We install and repair sprinkler systems for our customers using top-of-the-line parts and technicians. We also offer sprinkler maintenance, sprinkler analysis, and sprinkler winterization services. Call Dr. Sprinkler Repair (Boise, ID) at (208) 398-3471 to find out what we can do for you today!
BROKEN SPRINKLERS killing your lawn? Call Dr. Sprinkler Repair for a quick and effective fix for your lawn sprinklers. We expertly perform sprinkler repairs, installations, upgrades, and more! Since our start in 2009, we have been treating customers right with prompt service and fair prices. That's why we're the premier sprinkler service of Ada County.
When it comes to your lawn, don't waste time searching for a magical quick-fix. Get back to the basics and ensure that your lawn is properly hydrated. Dr. Sprinkler Repair (Boise, ID) can help you do just that! We've been in the sprinkler business a long time, so we know sprinklers. Our Ada County sprinkler technicians only use Rain Bird products for installations and repairs to guarantee that your sprinklers will work effectively and efficiently.
Dr. Sprinkler Repair specializes in sprinkler repair in the Ada County area. Our goal here at Dr. Sprinkler Repair is outstanding customer service and excellent communication with you, the customer. We are licensed and insured, clean-cut, non-swearing employees who look forward to making your sprinklers run the way you want them to.
Our sprinklers may not be quite this cute, but they do their job
effectively and efficiently! Give Dr. Sprinkler Repair (Boise Area) a
call today at (208) 398-3471.
When
summer rolls around, it becomes more important than ever to be sure
that your yard is properly hydrated. Dr. Sprinkler Repair can help you
do just that! Our technicians are experts in sprinkler installation and
sprinkler repair, as well as any sprinkler maintenance or sprinkler
analysis that you may need as time goes on.
“In dry periods, water
newly laid turf, freshly sown areas, and high-quality lawns. Leave established
lawns unwatered, but stop mowing because longer grass helps protect the roots.
The grass may turn brown, but will recover once it rains.”
“Water a new lawn every
week in dry spells, until it is established. You can tell when fine lawns need
watering because they lose their spring when walked on. Reduce water
evaporation by using sprinklers early in the morning or at night. Move seep
hoses by 8 inches every half hour.”
Automatic irrigation
systems have a controller or timer. Most controllers have a “rain” or “off”
mode that shuts off the signals to the valves. Turning it “off” allows the
controller to keep all the essential programming information stored in it. The
only change is that the valves will not activate. If you unplug or cut the power
to your controller, be aware that you may need to reprogram it in the spring.
Are you getting dry
spots in your grass, but the sprinklers seem to be working great? This could be
caused by the water pressure being too high. Too-high water pressure can cause
the sprinklers to mist, which results in water evaporating and not reaching the
plants or grass. If your sprinklers look like the image below, you could be
wasting water and may need sprinkler system maintenance.
We have many tools to
help deal with too-high and too-low water pressure. Our professional
technicians can fix any sprinkler problem. We pride ourselves on great
communication and vast experience in sprinkler repair.
To find a sprinkler
technician in your area, click here.
Broken Sprinkler Head
